key key
Loga na HOME

keymile-original   vmware-original   cisco-original    microsemi-original   c4-original

Products

KeyMile equipment

LineRunner SCADA NG

Is the broadband transmission system for reliable and cost-optimised transmission with up to 5.7 Mbps in telecontrol systems of:

 

  • Railroad and transport authorities
  • Motorways
  • Waterways
  • Airports
  • Pipelines and industry

 

LineRunner SCADA NG is a modular design. It is possible to operate on copper pairs, optical fibres or in SDH/PDH networks in a single system. On optical route sections ranges up to 40 km can be achieved. Radio relay equipment and leased lines can also be integrated into the system. Interchangeable line interfaces can be used to allow conversion between the different transmission media for any SCADA NG.

 

LineRunner SCADA is a multidrop system of the latest generation. Multidrop means that data are exchanged via a network. LineRunner SCADA NG is a multidrop system with a maximum of 63 LineRunner SCADA systems permitted on a single transmission route. The SCADA network can be arranged in either a linear or ring topology. With it LineRunner SCADA NG supports variable network topologies using almost any desired infrastructures.

 

LineRunner SCADA NG is designed for operation in extreme climatic conditions. It can be deployed in the temperature range of -25 °C to +70 °C. It is also shock resistant and can be operated in environments with high level of electromagnetic interference.


scada-original

 

UMUX universal multiplexer

  • Modular design enables flexible implementation of PDH, SDH equipment

  • Compatibility with the appropriate EU recommendations and ITU-T / ITU-R
  • Compact 19´´ or ETSI design
  • High integration, compatibility and reliability of plug-in cards
  • Use of highly integrated circuits for a large number of operating interfaces
  • SW download for individual cards
  • Physical cross connection of the interfaces  P0, nc P0, P12
  • Virtual cross connection of the containers VC12,VC3, VC4
  • Local voice and data interfaces, as well as remote access into these interfaces
  • SDH optical and electrical interface on the level STM-1, STM-4
  • EOC, ECC communication channel for the management of the node and the KeyMile equipment in network
  • Full backup of management, power and diagnostic functions of individual cards
umux-original


MileGate
combines broadband telephony, data and TV connections in one compact unit of new generation of NGN, which is an ideal platform for providing this service to the end user - FTTH (fiber-to-home).

  • Triple Play services, such as IPTV, high-speed internet connection and VoIP
  • Distribution through various DSL interfaces ( ADSL2plus, SHDSL, VDSL2 )
  • Optical transmission medium for network architectures FTTx
  • Optical and electrical Gigabit Ethernet uplink
  • Gateway media for POTS/ISDN and VoIP telephony V5.2 ( SIP/H.248 )
  • Maximum availability of services ( 99,999% )
  • Extensive quality of service features ( QoS )
  • Extended temperature range from – 25 up to + 60 Celsius grades

    MileGate2500_2300-original


XMP1
is a modular access system, deployed wherever it is important that the transmitted data has been transmitted to another network with a low processing time. It is usually used in public transport in data transmission and monitoring of electrical substations.

  • SDH cross connection 496 kb/ps x 64 ( without blocking )
  • Optimal support of network interfaces in the range from 2 Mb/ps to STM-1/4/16
  • Non-blocking PDH cross connections on the level 8k/64k s 16 x E1
  • Highly sophisticated SHDSL cards
  • Various interfaces for the transmission of voice ISDN, data, LAN functions
  • Modular system for all network typologies
  • Efficient system for management, testing and diagnostic functions
  • High-density with space saving in a compact design
  • Optimal for critical applications due to its high availability and reliability
  • Universal for the security and backup of the transmitted data
  • Integrated SDH multiplexer with data interface for STM-1/STM-4

    xmp1-original

PRS – primary reference source of synchronization

TimeSource 

The primary reference source of synchronization meets the requirements of ITU-T G-811 for synchronization and distribution of accurate time in the SDH network. PRS device can be installed on almost any window with a view on the sky, through the connection of the external GPS antenna on the window or external wall of the building and through its connection to the indoor unit PRS via the coaxial cable.

  • In case of GPS satellite outage, the internal unit  maintains its accuracy Starum1 – 3 weeks
  • Equipment is supplied with two outputs E1/2.048 MHz
  • It contains separately programmable outputs
  • SNTP time server is implemented in the equipment
  • Control of performance measurement is part of the equipment outputs
  • Equipment provides for the synchronization of messages
  • Extended system comprises eight other E1/2.048 MHz outputs
  • Equipment has a locally integrated and accurate rubidium oscillator
  • Innovative technology for the connection of  BesTime and CE certificate


prs-original

VMware

VMware
Simply put, the virtualization allows you to run multiple virtual machines on one physical hardware. Each virtual machine is allowed to share resources within various operating environments. On different virtual machines it is possible to initiate different operating systems with different applications on the same physical hardware. Each virtual machine contains a complete system and this eliminates potential conflicts with hardware resources. VMware works in the following way: it inserts a thin layer (software) directly to the hardware or the host operating system. This virtual machine includes a monitor or "hypervisor" that allocates the resources of the hardware, and these are dynamically and transparently allocated to each virtual server (applications). VMware is highly reliable and secure for network applications. Having no more the need to buy expensive server hardware, power supply and its expensive disk capacity, our customers will immediately feel the cost reduction. Network applications type-client are available to end-users at any time and at minimal costs.

Security system C4

Security system C4  
C4 is an integrated security system that provides centralized solution for the management of building security devices.
It offers the following customer comprehensive tools:

  • Central management of security equipments
  • Visualization and equipment monitoring
  • Automation of security processes
  • Analysis and evaluation of safety information
  • Central identity management
  • Support for crisis management


Thanks to its network architecture it enables to share the information about the operation of safety devices between multiple users. This increases the efficiency of company’s equipment management and its support services.